Threaded Cap for 3d printing.  Note this was an experiment, and the cap is not for a specific purpose.

 Download the zip file here.  File size approximately 4.8 Mb

TC_2020 Platium, plastic cap.

Two adjustable spanners and bend pliers.

Saved in two versions. The original platinum (ACIS) file, saved back from 2020 to 2017.  And an exploded to TC surfaces file. For use in TC deluxe ( 2017 or later),

Download zip   TC 2017 platinum file, 12 MB.

Download zip   TC 2017 deluxe file 9 MB.

Mini Sanding block

I needed to sand the edges of some 3D printed objects. I needed to try maintain a 90 degree angle. So I 3D printed this little sanding block

It is very simple with the sand paper being held in place by friction rather than screws or clamps. A taper on the mating surfaces, ensures the sandpaper is locked into place

TurboCAD 2018 file, (Zip)

Download zip Pro

Download zip Deluxe

Centre finder

A simple centre finder for use with the wood lathe. I have a larger centre finder, but wanted a smaller one to make it easier on small pieces of wood.

Note. No allowance was made for pencil thickness. Therefore I draw 3 lines and get the centre from them.

TurboCAD 2018 file in Zip format

Download zip  Pro

Download zip Deluxe

Paper cutter model. IN TC 2022 with TurboLux materials.

File can be downloaded in zip format.  Use the standard windows extract to get the .tcw file. Note, deluxe TC surfaces obtained by exploding ACIS objects.

 Download the zip file here.  

TC 2022 Platinum (ACIS objects).  Zip File size 2,821 KB.

Paper Cutter Platium.

TC 2022 Deluxe (TC surfaces).   Zip file size 21,980 KB.

Paper_cutter Deluxe.

Milk float.

Saved in two versions. The original platinum (ACIS) file, saved back from 2020 to 2017.  And an exploded to TC surfaces file. For use in TC deluxe ( 2017 or later),

Download zip   

TC 2017 platinum file, 12 MB.

Download zip   

TC 2017 deluxe file 9 MB.

Simple text effect in TC + AnimationLab..

Four text effects using AnimationLab plug-in,  contained in a zip file. They were E-Packed, so any images should remain in the same location as its tcw file.  The RedSDK rendering engine was used in TC 2017.  But it should easily be able to convert to Lightworks engine, EXCEPT, I don’t know if the current versions of Lightworks can use volumetric effects.

Download zip   TC 2017 platinum file, 10.5 MB (approx).

Deluxe will be posted when time allows.

A wooden cart

Note.  The file does not contain any materials.  This is so the file can be used with Lightworks, or RedSDK. By simply applying ones own materials.

Cart platinum  zip   

TC 2017 platinum file 950 KB.

Cart deluxe zip   

TC 2017 deluxe file, 8 MB.

Indoor scene

An indoor scene produce for rendering tests. Note may be slow (up to 5 minutes) to render.  

SEE ReadMe file in the zip file.

RedSDK Indoor platinum  zip   

TC 2017 platinum file 32.8 MB.

RedSDK Indoor deluxe zip   

TC 2017 deluxe file, 177 MB.

Lightworks Indoor platinum  zip   

TC 2018 platinum file 32.8 MB.

Lightworks Indoor deluxe zip   

TC 2018 deluxe file, 175 MB.

Outdoor scene

An outdoor scene produce for rendering tests. Note may be slow (up to 5 minutes) to render.  

SEE ReadMe file in the zip file.

RedSDK Outdoor platinum zip   

TC 2017 platinum file, 35.9 MB.

RedSDK Outdoor deluxe zip   

TC 2017 deluxe file 69.8 MB.

Lightworks Outdoor platinum zip   

TC 2018 platinum file, 35.4 MB.

Lightworks Outdoor deluxe zip   

TC 2018 deluxe file 67.3 MB.